12
11
4.2.1. Using the Remote Controller
Batteries
How to insert a battery
1) Open the cover at the top of the near side of the remote control.
2) Insert a CR2025 type battery to be aligned with appro/- polarity.
3) Close the cover completely.
When to replace a battery
If the operational range of remote control is getting smaller, it indicates
batteries are almost consumed.
Replace the battery.
How to replace a battery
1) Check +/- polarities and insert a battery to be aligned with appropriate
+/- polarity.
2) Even if old and a new battery is the same. , do not use battery with
different characteristics.
Accident prevention
1) Do not recharge, heat or disassemble the battery. Do not cross +/-
polarities.
2) If remote controller is not going to be used for a long time, take the
battery out.
Paring
Is pressing RCU’s power and mute button at the same time while STB
become “power on mode”
Then RCU’s power button is lighting ( End paring )
5. How to Connect
5.1. When connecting IRD to Car TV with AV connectors
5.2. When connecting Car to STB with power cable
