Operating Instructions
3
(
1
)
Panel Description
Transmitter Panel
1 . HDMI Output.
2 . EDID copy button.
3 . Status of power input. When power input on, the LED lights.
4 . Status of signal connection. When this works well, the LED lights.
5 . CAT-5E/6 output.
6 . IR TX.
7 . IR RX.
8 . HDMI Input.
9 . Power input, 5VDC.
When the sink can’t display the signal, try to connect HDMI output port of the transmitter to the display
device. Plug the power supply into Transmitter, press the “EDID copy button” and the light flashes, the
EDID data has been copied from the display device successfully, at least press ”EDID copy button” for
3 seconds, The EDID will be reset to the default setting.
The distance is 40m under 5.1CH or 7.1CH.
Note1:
Note2:
Receiver Panel
7 . Power input, 5VDC.
6 . HDMI output
5 . IR RX
4 . IR TX
3 . CAT-5E/6 input
2 . Status of power input. When power input on, the LED lights
1 . Status of signal connection. When this works well, the LED lights
RX
TX
HDMI Extender over single Cat5e/6 cable
HDMI Output
RX
TX
