User Manual
MTIRW IR/RF Remote Controller
Remote Controller – User Manual
5
3.4 Firmware Upgrade
To upgrade the Remote Controller firmware it is necessary to connect it via USB to a PC.
When the device remote is connected open ‘my computer’, double click to open mobile
devices ‘CRP DISABLED’. Simply replace the new existing ‘firmware.bin’ with the new
‘.bin’ file. To complete the upgraded disconnect the Remote Control from the computer
and then reset it.
3.5 Universal code
The Remote Controller has built-in HDL IR codes, which can be used to control all HDL
panels and no need to learn the IR codes.
For example:
1) In ‘1 Col panel’ page, you can control of 1 Col panels, 2 Col panels, touch panels, and
even LCD DLP panels is possible.
2) But in “DLP panel” page, you just can control DLP panels.
3.6 Changing Icons
To change the Icon shown on the Remote Control, please use the
HDL Easy
Engineering Editor
(Icon “Remote Controller” on the menu bar).
Icon size: (pixel)
DLP panel:
64*25
IR panel:
64*25
RF pane:
64*25
Fig.6 Firmware Upgrade
Fig. 5 Setting the RF receiver address
