Prism Lite Series Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlautomation.com
11
5 Sleep Group Setting
This panel has two status: Sleep and Standby
Sleep: triggered by command, and the panel will enter sleep mode (similar to pressing
the power button for the mobile phone to enter sleep mode)
Standby: in a set period of time after last operation, the system enters standby mode
automatically (similar to the mobile phone entering standby mode with no operation for a
short period of time)
“Sleep Group” refers to the following situation: if one panel is woke up from sleep/standby
mode, other panels in the same sleep group will be woke up as well. Through configuration,
one panel can send command for all the panels in the same sleep group to enter sleep mode.
Despite that the standby status of the panels in the same sleep group stays independent.
Click “Sleep Group Setting” in configuration page, as shown in Figure 5-1.
Figure 5-1 Sleep group configuration
