Page 14 of 22
2. It will showed as follows after choosing the
“
Source
”
3. When
“
Source
”
showed as above, there are three ways to enter it
:
3.1 Directly click.
3.2 Select "source" and then automatically enter it.
3.3 Press “
▲▼
”to select the signal channel wanted and then press "OK" to
confirm.
4. Source can also be selected by the Full Touch Menu. Please refer to the
details at the introduction of Full Touch Menu.
Introduction of
“
Set
”
Menu
1. The “Set” Menu can be selected by three different methods.
1.1 Enter from "Menu" which is at the bottom of the screen;
1.2 Enter from the "Menu" by the remote control.
1.3 Enter from the "Menu" on the front panel.
2. “Set” Menu options can be selected by two methods.
2.1 Directly click the icon to choose.
2.2 Press "
▲▼
" to select. (Setting: Picture, Sound, Adjust,Function)
*Picture
1.1 Directly click on the icon to choose.
1.2 Press
“
▲▼
”
to select. Press "
◄►
" to confirm the submenu and adjust the value. Press "
◄►
" to move the submenu (purple
color light means to be selected)