– The DVI or HDMI cable is using thin gauge copper wires and its length exceeds 5 meters
– The DVI or HDMI source is unable to deliver the 0.5A maximum current over its HDMI or DVI pin #14.
SOLUTION: We recommend you use our USB to Mini USB +5v cable or any +5v power supply compliant
to the following:
– Provides REGULATED (+/- 5%) 5VDC power with 0.5A max DC current.
Some notes on when you first connect the HDfury !
When you connect the HDfury for the first time you may see the screen shifted to the left > This is
normal.
Simply adjust your display’s settings to shift the image back. This needs to only be done once.
On some European CRT displays you will not be able to shift back far enough because of the US/Euro HD
‘porch’ differences.
If this affects you, switch your source to 60Hz to solve the problem. You can setup a new memory and it
won’t disturb any of your original settings.
As the HDfury comes with his own EDID, you will always have the H position to adjust.
For example, you can connect HDfury to your PC VGA screen, and you will see that the first time the
picture is shifted to the left.
You can then adjust this setting on your PC display, and it will be perfect. If you connect your computer
back to the PC VGA screen, the image will centered as before!
Your screen / display has memory functions to store your settings depending on the source. There is no
other settings to adjust.
Enjoy ! Good times ^_^
