HDfury3.com
23
HDfury3 User Manual
My picture is blank when I play back Blu-ray discs but not when I play DVDs.
What's going on?
Blu-ray discs are natively 1080p/24Hz. You likely have your Blu-ray player set to 24Hz
or "Automatic" frame rate output so that it is outputting a 24 Hz (fps) signal. Most
displays that do not have HDMI inputs do not work at 24 Hz so you need to turn this off.
Either set your Blu-ray player to 50 or 60Hz or set 'Automatic Frame Rate' to off. See
your Blu-ray player manual.
My Sony G90 CRT projector looks funny when I use the HDfury3.
Go into the G90 service menu "Input Setting" with the fury installed and set the "Clamp"
to HP or H/C from auto. This should straighten out the picture if it is varying in
brightness and getting weird bands of dark as scenes change.
I can't get past 1080p on my PC while hooked up from my DVI port to the HDfury3
even when using PowerStrip. Why not?
In order to go beyond the 165Mhz pixel clock barrier of 1080p/60 from your PC you will
need a DUAL LINK DVI to HDMI cable. That's the cable that has all the pins filled in on
the DVI end and had an HDMI plug on the other.
Image Shifting
Will the HDfury3 shift the image to the left or cropped (cut off) in any way like
some other converters?
No. The HDfury3 includes advanced features to ensure that the image stays perfectly
centered when component (Y/Pb/Pr) output mode is used. The HDfury3 also adds a
new feature to allow for manual centering of the image when RGB output mode is used.
Does the HDfury3 automatically center the image?
In component (Y/Pb/Pr) output mode the HDfury3 always automatically centers the
image. Nothing else needs to be done. In RGB (VGA) output mode the L/R image shift
control on the side of the HDfury3 may be used to manually center the image after
turning DIP switch number 5 to ON.
The picture is not centered when I use the HDfury3 in RGB (VGA) output mode.
How do I fix it?
Open the DIP switch cover and turn DIP number 5 to ON. Then use the L/R momentary
contact switch on the side of the HDfury3 to shift the image left or right until it is
centered. This only needs to be done when you use a new resolution for the first time.
The HDfury3 will then remember the setting for that resolution for the next time you use
it. The "theoretical" correct RGB center values are already programmed into the
HDfury3 core so in many cases no shifting will be required, but testing has shown that
some TVs do need a slight adjustment. The HDfury3 is the first HDfury to give you this
flexibility.
The L/R image shift doesn't work!
Summary of Contents for HDfury3
Page 1: ...HDfury3 USER MANUAL ...
