manualshive.com logo in svg

HDFury 4K Linker, User Manual, Page: 12 / 37

Share
Download
HDFury 4K Linker User Manual Download Page 12

 

Disclaimer:

 

 3

rd

 party and/or custom firmware providing extra features are not covered in this manual.

 

12 

4K Linker – User Manual 

List of Custom EDID available. 
 

User can select an EDID from all below EDID tables or force the unit to use Sink EDID or Fixed EDID 
mode. 
 

[SINK MODE EDID]

 

Use connected display EDID capabilities. 
 
 

[CUSTOM/GUI USE EDID] 

1 – Custom Uploaded/Default EDID 
2 – 4k60-444 600MHz HDR BT.2020 All Sound 
3 – 4k60-444 600MHz HDR BT.2020 Stereo 
4 – 4k60-444 600MHz All Sound 
5 – 4k60-444 600MHz Stereo 
6 – 4k50-444 600MHz HDR BT.2020 All Sound 
7 – 4k50-444 600MHz HDR BT.2020 Stereo 
8 – 4k60-420 12-bit HDR BT.2020 All Sound 
9 – 4k60-420 12-bit HDR BT.2020 Stereo 
10 – 4k60-420 12-bit BT.2020 All Sound 
11 – 4k60-420 12-bit BT.2020 Stereo 
12 – 4k60-420 8-bit 300MHz All Sound 
13 – 4k60-420 8-bit 300MHz Stereo 
14 – 4k30-444 300MHz All Sound 
15 – 4k30-444 300MHz Stereo 
16 – 4k30-RGB 300MHz All Sound 
17 – 4k30-RGB 300MHz Stereo 
18 – 4k24-422 12-bit BT.2020 All Sound 
19 – 4k24-422 12-bit BT.2020 Stereo 
20 – 1080p-444 148MHz All Sound 
21 – 1080p-444 148MHz HDR Stereo 
22 – 1080p24-444 All Sound 
23 – 1080p24-444 HDR Stereo 
24 – 1080I-444 All Sound 
25 – 1080I-444 Stereo 
26 – 4k60-444 600MHz HDR BT.2020 5.1 Sound 
27 – 4k60-420 12-bit BT.2020 5.1 Sound 
28 – 4k60-420 8-bit 300MHz 5.1 Sound 

 
 
[FIXED EDID MODE]

 

1080p-444 148MHz Stereo 
 

Note:

 All options are available via USB GUI. 

To upload a custom EDID or Sniff EDID from sink device, please refer to GUI section p.17 
 

Summary of Contents for 4K Linker






































Reviews:

No comments