10
OPTIONAL ACCESSORIES
PT-FTVD TESTER FOR FIREFLY DETECTORS
The PT-FTVD Proof Tester® FireFly Detector Tester
is for use on all FireFly Detector models. This
tester generates high voltage AC for testing
the FireFly Voltage Detector.
To use, apply the metal plate on the bottom of the
FireFly Tester to the right side of the Firefly Detector
housing as shown. Press and hold the TEST button
on the Proof Tester. A properly operating FireFly
Detector will signal the presence of voltage with
both the beeper and red lights. If the FireFly Voltage
Detector does not operate, replace the Voltage
Detector batteries, per the instructions (page 8).
If the Proof Tester LED does not light, replace the
Proof Tester battery with a 9V lithium
or alkaline type battery.
CAUTION:
This device generates high
voltage AC for testing the voltage detection
function in FireFly Detectors. There is no
danger of electric shock when this Tester
is used as directed. Discontinue use and
return to HD Electric Company for service
if the housing is cracked or broken,
or if the battery cover is lost.
WARNING:
Do not use this Tester except
as directed. Do not use to test equipment
other than specified FireFly Voltage Detectors.
Do not apply to energized circuits or equipment.
Do not operate this Tester without the
battery cover and do not open the housing.
Refer all servicing to the factory. Failure to
follow these instructions may lead to
electric shock, severe injury or death.
HOTSTICKS
A range of hotsticks are available in lengths starting
at 4’. Contact HD Electric for more details.
Summary of Contents for Firefly
Page 11: ...11 ...