6/8
Receiver Rear Panel
1. HDMI OUT:
This slot is where you connect to a HDMI equipped TV or
monitor.
2. POWER:
Plug the 5V DC power supply into the unit or connect to the
source USB port via USB to Micro-USB cable.
3. Button:
The button has a variety functions.
Wakeup Function:
If the adapter is in Sleep mode (Status LED is OFF
and power supply is connected), pressing this button will wake up the
adapter and start normal operation.
Set to Factory Default Function:
At any point, a long press (ten
seconds) on the button will reset the adapter to factory default.
Next Source Function:
When the button is short pressed on the receiver
side, and if other transmitter sources are available in its network, the
receiver will give up the current video connection and connect with the
next available source.
User Case Example:
Two or more transmitters are in the room and are
associated with one receiver attached to a display. The user is currently
receiving video from one of the available sources, but wants to switch to
another source. To accomplish this, pressing the button of the receiver
will cause it to switch from its current audio/video source to the next
available source. Every time the user presses the button, the receiver will
attempt to connect to the next available transmitter in the room. A
maximum of 16 transmitters can be supported in the network.
Note that pressing the button on the receiver will not interrupt the current
audio/video connection if there is no other transmitter available in the
network. In that particular case, the button will do nothing.
1
2
3
