HDC LEA 300, Instructions Of Use, Page: 19 / 36

18
Display
Display Designation Function
0 Zero The heating zone is activated
1…9 Power level Selection of the cooking level
A Heat accelerator Automatic cooking
E Error message Electronic failure
H Residual heat The heating zone is hot
L Locking The control panel is locked
STARTING UP THE APPLIANCE
Before using your new hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Starting-up
•
Start-up/ switch off the hob
Action Control panel Display
To start press key [ ] 3 x [ 0 ]
To stop press key [ ] nothing or [ H ]
•
Start-up/ switch off a heating zone
Action Control panel Display
Zone selection press selection key display is on
Increase power press key [ + ] [ 1 ] to [ 9 ]
Decrease power press key [ - ] [ 9 ] to [ 1 ]
Stop press simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
or press key [ - ] [ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don’t touch the heating zone and don’t put any heat
sensitive object on them. There are risks of burn and fire.
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power on
the preselected level.
•
Start-up:
Action Control panel Display
Zone selection press selection key [ 0 ]
Full power setting press key [ + ] [ 1 ] to [ 9 ]
Automatic cooking repress key [ + ] [ 9 ] is blinking with [A]
Power level selection press key [ - ] [ 9 ] wents to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [A]