8
HARDWARE INSTALLATION
1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit HD-C5S4P-TX.
2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit HD-C5S4P-RX.
3. Connect IR Blaster/Receiver to both TX and RX units.
4. Connect a Cat-5/5e/6 cable between the transmitting and receiving units.
5. Make sure this Cat-5/5e/6 cable is tightly connected and not loose.
6. Plug in 5V DC power supply unit to the power jack of the receiving unit HD-C5S4P-RX.
7. Plug in 5V DC power supply unit to the power jack of the transmitting unit HD-C5S4P-TX.
8. If you see flickering or blinking image on the display, please adjust the rotary control switch to improve
the cable skew. MAX stands for the strongest HDMI signal level for longest possible transmission
length while MIN stands for the weakest HDMI signal level for short transmission length. Please adjust
the signal level from MIN to MAX and stop turning the rotary switch whenever the audio/video is
playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten
the product life significantly!
