XTND 4K (40m) Extender Manual
4
TRANSMITTER (X1)
1. Power LED
: This white LED illuminates when the
device is connected to its power supply
2. DC input
: Plug the 24V / 1A DC power supply
into the unit
3. HDBaseT output
: Connect the CAT 5e/6 cabling
run from the Receiver to this port
4. HDMI Input port
: Connect HDMI source
e.g. BluRay player, with HDMI cable
5. IR RX
: Plug IR RX into this port (if using forwards
IR)
6. IR TX
: Plug IR TX into this port
7. RS232 input/output
: Connect an RS232 cable
via phoenix connector
8. Connection status LED
:
i. Solid: The Transmitter and Receiver have a good
connection
ii. Flashing: The Transmitter and Receiver have a poor
connection
iii. Dark: The Transmitter and Receiver have no
connection
9. Data status LED
:
i. Solid: There is a HDMI connection with HDCP
ii. Flashing: There is a HDMI connection with no HDCP
iii. Dark: No HDMI signal
7
8
9
1
2
3
4
5
6
TX/RX
DC
24
V
IR (IN) IR (OUT)
HDBASET
HDMI INPUT