XTN
D 4K100TPC
2
3
HD CONNECTIVITY LTD, trading as HDANYWHERE registered in England and Wales. Company No: 06046737 Registered office: Unit 23 Link Business Centre, Link Way, Malvern, Worcestershire, WR14 1UQ. Contact: [email protected] Tel: 00441684575324
XTND 4K100TPC TX / RX
1. “Long Range Switch”: This Switch enables Long Range Mode” this mode disables 4K
supports but increases the effective transmission distance of 1080p content to 150m
2. “HDBaseT output”: Connect the CAT 5e/6 cabling run from the receiver to this port
3. “HDMI Input port”: Connect a HDMI source e.g. a Blu-Ray player, with a HDMI cable
4. “Lan Port”: Connect an active ethernet connection to this port to enable the dual
ethernet ports on the receiver
5. “RS232 Port”: Provides bi-directional RS232 between receiver and transmitter
6. “USB Port”: This port is used to apply firmware updates
7. “Stereo (OUT)”: Receive stereo audio from the receiver via 3.5mm jack cable
8. “Stereo (IN)”: Send stereo audio to the receiver via 3.5mm jack cable
9. “Digital Out”: Allows ARC extraction of display audio via optical cable
10. “IR (OUT)”: Plug the supplied IR TX into this port
11. “IR (IN)”: Plug the supplied IR RX into this port
12. “ARC Button”: Press to enable support for ARC, ARC is only supported on the optical
port
13. “DC24V”: Connect the included 24V/1A power supply
14. “Long Range Switch”: This Switch enables “Long Range Mode” this mode disables
4K supports but increases the effective transmission distance of 1080p content to
150m
15. “HDBaseT output”: Connect the CAT 5e/6 cabling run from the receiver to this port
16. “HDMI Input port”: Connect a HDMI source e.g. a Blu-Ray player, with a HDMI cable
17. “Dual Lan Ports”: If an active ethernet connection is present on the Transmitter,
these ports will provide a network connection
18. “RS232 Port”: Provides bi-directional RS232 between receiver and transmitter
19. “USB Port”: This port is used to apply firmware updates
20. “Stereo (OUT)”: Receive stereo audio from the receiver via 3.5mm jack cable
21. “Stereo (IN)”: Send stereo audio to the receiver via 3.5mm jack cable
22. “Digital Out”: Allows ARC extraction of display audio via optical cable
23. “IR (OUT)”: Plug the supplied IR TX into this port
24. “IR (IN)”: Plug the supplied IR RX into this port
25. “ARC Button”: Press to enable support for ARC
26. “DC24V”: Connect the included 24V/1A power supply
1
14
6
7
8
9
10
23
22
19
20
21
11
24
12
25
13
26
2
15
3
16
4
17
5
18
