Distribution:
PureLink GmbH
Available from B2B Online Portal
XTND 4K (100m) Extender Manual
3
QUICK SETUP
SYSTEM FEATURES
This quick setup guide will get your extender up and working in less than 5 minutes. If you need to integrate IR
control then please continue on to
page 6
.
1.
Power off your display and your HDMI source
device
2. Connect the HDMI source to the HDMI input
on the XTND 4K (100m) Transmitter using an
appropriate HDMI cable.
3. Connect a display such as a HDTV or HD
Projector to the HDMI output port on the
XTND 4K (100m) Receiver using an appro-
priate HDMI cable. We recommend that you
use high-speed HDMI cables no longer than 5
meters in length.
1. Delivers uncompressed video and audio over
network cable
2. Supports the following resolutions:
a. 640x480, 800x600, 1024x768, 1280x1024,
1600x1200, 1920x1080,1920x1200,
4096x2160p (DCI), 3840x2160p (UHD) DTV/
HDTV: 480i/576i/480p/576p/720p/1080i/1080
p/4Kx2K
b. All 3D formats including 3D at 1080p60
c. Up to 48-Bit Deep Colour
3. Enables HD viewing in one additional room
4. Now connect a single Cat5e/6 cable up to
490ft/150m in length between the Cat output
port of the XTND 4K (100m) Transmitter and
the Cat input port on the XTND 4K (100m)
Receiver.
5. Plug in the power supply for either the
Transmitter or the Receiver.
6. Power on your HDMI source device, then
power on your display.
7. At this point the display should show the
video and audio of the HDMI source device
that is connected to the extender.
4. Stereo or multichannel audio including:
a. LPCM 7.1CH
b. Dolby True HD
c. DTS-HD Master Audio
d. Dolby Atmos
e. DTS: X
5. Two-way IR
6. Bi-directional RS232 control.
7. Ethernet Pass Through
8. Audio Return via HDMI or optical
