HD Rehab AB
, Tryffelslingan 4, 181 57 Lidingö, Sweden
tel. +46(0)8-767 04 80 [email protected] www.hdrehab.se
MD
Canopy
Art. nr. 39852, 39855-1 / 39855-2 / 39856-1 / 39856-2
Doc. nr. 96803-1 Rev A 2021-05-12
User manual /
Assembly instructions
Page 1 (1)
Intended use
Canopy is intended to be used with a HD Motion wheelchair as protection from sun and wind.
Parts included
Assembly
Assemble a mount to the back frame tube.
The mount can be set to whatever height is
suitable for the user.
Note:
Ensure that the mount does not affect
cables. The cable clips can be re-positioned
slightly if necessary.
Assemble the second mount. The two
mounts must be set at the same height on
each side, and parallel to each other.
Fit the canopy into the mounts.
If locking mounts are used, push the buttons
(a) so that the canopy slides in fully.
When removing the canopy, push the
buttons to release it from the mounts.
Use and Care instructions
Always replace damaged parts immediately. For more information see Maintenance Instructions,
document number 96730-1.
1 x canopy
2 x mount
(model sw34 with locking shown)
a
1
2
3
2
3
1