2 x
Parts included:
Assembling
1. Unscrew the screws (2) completely and remove the
push bar (1).
2. Fit the separate push handles (3) and secure them
using the enclosed screws.
3. Check that the handles are firmly in place.
4. The height adjustment knob (A) cannot be used with
separate push handles. Instead use the accompanying
screws (5) with their washers (4).
Press the locking knob and raise the push handle about
15 mm. The push handle bar includes a threaded hole
into which you are to fit the screw (5).
Note: Place the washer (4) between the screw and the
backrest bar, with the curved side of the washer on the
backrest bar.
Tighten the screw securely and check that the push
handle is firmly in place.
Use and Care instructions
The push handles can be cleaned by wiping with soap and water. They can also be disinfected with
hand sanitizer. For further information, see the Maintenance Instructions, art. no. 95730-1.
Rev. A
Latest revision: 2013-01-09
Art.no. 95827-1
Page 1 (1)
User manual /
Assembly instructions
Push handles, pair
MANUFACTURER: Hantverksdesign & Rehabiliteringsprodukter AB
Tryffelslingan 4, SE-181 57 Lidingö, Sweden
tel. +46 8 767 04 80
fax. +46 8 767 50 00
www.hdrehab.se [email protected]
