9
Layout & Connection Proceedure
6. Use only supplied power supply 2A 5V.
Make sure that the power supply is well ventilated.
7. HDMI OUT Connect to TV using HDMI cable.
8. IR Receiver 3.5 mm.
Position near TV so that remote operation of the source is possible.
Some experimentation is recommended for best results as lights, reflections
and TVs can affect the IR stability.
9. RJ45 LAN input. Connect to TX encoder or network.
10.The RESET button is used if the picture quality is not normal or flashing.
Press the reset button for at least 3 second. On release the picture will
return after a few seconds.
NOTE! It is recommended that the RX is secured by screws, not tape.
Cables should be secured with cable ties so that minor movement will not
dislodge them from there correct location.
DECODER
BC78309/
BC84476
RX FRONT
RX BACK
6
7
8
9
10
