2
INTRODUCTION
The PT-DVI Proof Tester Voltage Indicator Tester is for use on the DVI with any
available probes. This tester generates high voltage AC for testing the DVI. To use,
turn on the DVI, hold the Tester in one hand and the DVI in the other. Apply the
DVI probe to the metal end plate on the Tester. Press and hold the TEST button
on the Tester. A properly operating DVI-500 will indicate a voltage of 0.2-0.5kV
depending on how the DVI and Tester are held and a DVI-100 will indicate
1.5-4.5kV. For best results, hold both units with a tight grip and wrap your
fingers around each unit. If the DVI does not indicate voltage, do not use it
and return it to HD Electric Company for service.
CAUTION
This Tester generates high voltage AC for testing DVI AC voltage indicators.
There is no danger of electric shock when this tester is used as directed.
Discontinue use and return to HDE for service if the housing is cracked or
broken, or if the battery cover is lost.
CAUTION: High Voltage
WARNING:
Do not use this tester except as directed. Do not use to test equipment other
than specified DVI Voltage Indicators. Do not apply to energized circuits or
equipment. Do not operate this Tester without the battery cover and do not
open the housing. Refer all servicing to the factory. Failure to follow these
instructions may lead to electric shock, severe injury or death.
OPERATIONAL IMPAIRMENT
If the PT-DVI is used in a manner not described in this instruction manual, the
protection and effective operation of this equipment may be impaired.
CARE AND MAINTENANCE
STORAGE - It is recommended for protection of the PT-DVI that it is stored in
the DVI carrying case.
PT-DVI
PROOF TESTER
®
VOLTAGE
INDICATOR TESTER
