4
8. BATTERY MAINTENANCE AND CHARGING PROCEDURE
Important: Before first use charge the battery for 15 hours.
Always charge with power turned off.
To save battery power, the unit is programmed to self shut-off within 60 min. if no activity,
receiving or transmitting is detected. A chirp tone will be heard 30 second before shutdown.
When the battery is almost empty, A number of alert short tone beep will be heard before
shutdown, and the red LED light will blink.
Important:
For best functionality, remove hair around the ears from under the cushions to
improve the acoustical seal against the head. Eyeglass temples should be as thin as possible and
conform close to the head. Turn on the headset and adjust the volume for best listening level.
10. HEADSET MAINTENANCE AND USER INFORMATION
In order to fully benefit from the superior noise attenuation, wear PAWN 100% of the time you
are exposed to noise!
Regularly clean the outside of PAWN using warm water and a mild detergent.
WARNING:
The unit must not be submerged in water.
Do not store or place PAWN in temperatures exceeding +55 C (13O F). Do not place the unit
behind a car windshield or in direct sunlight.
Certain chemicals may negatively effect this product. The manufacturer can provide further
information.
PAWN and especially the
cushions
may degrade over time and should be examined regularly to
verify that they are not cracked or otherwise damaged. Replacement cushions are available. For
cushion replacement just pull off the old ones and snap in the new cushions.
Important- If these instructions are not followed properly, the noise attenuation properties and
functionality of the unit may be negatively affected.
