10
QUCIK TIPS:
AC Adaptor:
The PhysioStep LXT does need to be plugged into a standard electrical outlet.
The AC adaptor connects at the rear base of the unit, at ground level, on the end of the unit that
is beneath the seat. The display is powered by the adaptor and does not need batteries.
Quick Start:
If you would like to start a simple workout, just press the Start Button and then
use the arrows to set the resistance. It will automatically start you at level 1.
Full Extension:
When one side of the PhysioStep LXT is fully extended
, to “un-lock” the
extension simply pull the opposite handle towards you while keeping your feet on the pedals.
For example, if the right pedal is furthest from the seat, pull on the left handle to release the
extension.
Heart Rate:
If you would like to monitor your heart rate while using the PhysioStep LXT,
simply use any chest belt. There is a wireless heart rate receiver in the display and it will
automatically connect with all common brands of chest belts (i.e. Polar, Garmin etc). If you
don’t already have one, local sporting goods stores are a good place to purchase. The FT1 is
one model that works well.
Levelers:
There are levelers in the front of the unit, beneath the shroud. Please adjust the
levelers to stabilize the unit on your floor.
MANUAL: PHYSIOSTEP LXT DISPLAY CONSOLE
This manual covers the following categories:
-
Key Functions
-
Operating Ranges
-
Operating Instructions
-
Additional Information
Summary of Contents for PhysioStep LXT
Page 3: ...3 EXPLODED DRAWINGS ...
