©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
30
12 Welding
Danger due to noise
Wear your ear protectors during welding.
Observe furthermore your working instructions and the accident preventi-
on regulations.
Inform colleagues working in the immediate vicinity accordingly before
starting work.
A > 90 dB (A)
bang can occur during the welding process.
Check whether the welding elements have been inserted into the welding
gun.
Insert welding elements, if necessary.
Place the welding gun perpendicularly onto the workpiece as soon as the
power unit is ready for the welding process.
Press the welding gun firmly with both hands against the workpiece until
the welding gun attachment (spacer) is resting uniformly on the workpie-
ce.
3
Hold the welding gun firmly, steady and straight.
For exact positioning of the welding gun use the built-in bubble level (3).
Ensure that you do not touch any metal parts of the welding gun.
Welding process follows automatically after 0,5 sec., if
– LED (Ready for welding) shows green,
– welding gun is pressed to radiator,
– both welding elements are in metallic contact.
Always pull the welding gun perpendicularly away from the welding
element after the welding process
.
If you pull the welding gun away at an angle, you will strain the chuck and
shorten its service life.
Summary of Contents for ACCU-TWIN 92-10-2280
Page 49: ......