Bedienen des Datenrekorders
34
A3169-8.0
HBM: public
CX22B / CX22B-W
Sie können auch direkt eine Remotedesktopverbindung
(Standardprogramm des Windows Betriebssystems) auf
bauen. Dazu müssen Sie die IP‐Adresse des Geräts
kennen. Das Gerät wird in der Werkseinstellung mit
DHCP geliefert. Sie müssen somit mindestens bei der
Erstinbetriebnahme die Software „
HBM Device Manager
“
verwenden oder mit direkter Peripherie arbeiten.
Sie finden das Programm Remotedesktopverbindung auf
Ihrem Rechner unter z.B. Windows 7:
Alle Programme
−
> Zubehör
.
6.2.1
Direkte Ethernetleitung zwischen PC und
Datenrekorder
►
Verbinden Sie Ihren PC und CX22B‒W über ein
Ethernet‐Kabel der Kategorie CAT5e oder besser
.
►
Installieren Sie das Programm
HBM Device Manager
,
zu finden auf den Supportseiten von HBM oder im
Softwarepaket
QuantumX / SomatXR Systemsoft
ware
.
►
Starten Sie das Programm
HBM Device Manager
auf
dem PC:
Windows‐Startmenü
−
> Alle Programme
−
> HBM
−
> HBM Device Manager.
►
Klicken Sie auf
Geräte suchen
.
►
Wählen Sie den Datenrekorder aus der Liste aus, die
aktuelle(n) Adresse(n) der Schnittstelle (WLAN nur
bei CX22B‒W) werden ebenfalls angezeigt. Das
Modul in
hat die IP‐Adresse 172.19.204.252.