HBM FS42, User Manual, Page: 53 / 76

Graphical User Interface
FS42
A4250-5.0 HBM: public
53
Fig. 6.7
The displayed data can be zoomed in using the Zoom In
button (number
4 in Fig. 6.6 ). While the button is active,
the area to zoom in can be selected. When pressed
back, the displayed data will be zoomed out.
Copying Saved Datasets
Data can be readily saved as a .txt file to an external
USB flash drive by pressing the Export button (number
5
in Fig. 6.6 ). The saved data corresponds to the data that
is displayed on the Data Graph.
Deleting Saved Datasets
The Available Database Space is displayed on a specific
box (number
6 in Fig. 6.6 ). Pressing the Delete button
(number 7 in Fig. 6.6 ) will remove the selected dataset.
Note that saving new data is impossible when Available
Data Base Space is lower than 5%.
6.2.4 Configuration
Under the Configuration tab it is possible to configure the
sensors and branches to be measured by the device.
Sensors in iLog Software are organized in a tree. Its ele­
ments are Configurations, Branches and Sensors. The
configuration is the parent tree node and has one branch