HBM 1-C11/100N-3, Mounting Instructions, Page: 11 / 64

General instructions for use
C11
A05449_01_Y00_02 HBM: public
9
4 General instructions for use
Force transducers are suitable for measuring compressive forces. They
provide highly accurate static and dynamic force measurements and must
therefore be handled very carefully. Particular care must be taken when
transporting and installing the devices. Dropping and knocking the transducer
may cause permanent damage.
C11 series force transducers have a convex force application part, to which the
forces to be measured must be applied
.
Chapter10 „Specifications“, page 18 lists the permissible limits for mechanical,
thermal and electrical stress. It is essential to observe these limits when plan­
ning the measuring set-up, during installation and, ultimately, during operation.