HBK C16M, Mounting Instructions

Page: 19 / 56

17
C16M
ACCESSORIES
10 ACCESSORIES,
TO BE ORDERED SEPARATELY
Each for two weighing modules (see Dimensions):
1-ZAC16/MSL40T , for C16/MSL20 t...40 t, consists of:
1 piece threaded rod M20x1000
1)
, galvanized
6 pieces hexagonal nut M20 DIN 934, galvanized
2 pieces washer DIN 9021,
∅
21 mm, galvanized
1-ZAC16/MSLR40T , for C16/MSL R 20 t...40 t, consists of:
1 piece threaded rod M20x1000
1)
, stainless steel
6 pieces hexagonal nut M20 DIN 934, stainless steel
2 pieces washer DIN 9021,
∅
21 mm, stainless steel
1-ZAC16/MSL60T , for C16/MSL60 t, consists of:
1 piece threaded rod M30x1000
1)
, galvanized
6 pieces hexagonal nut M30 DIN 934, galvanized
2 pieces washer DIN 9021,
∅
31 mm, galvanized
1-ZAC16/MSL100T , for C16/MSL100 t + 200 t, consists of:
4 pieces threaded rod M30x1000
1)
, galvanized
12 pieces hexagonal nut M30 DIN 934, galvanized
4 pieces washer DIN 9021,
∅
31 mm, galvanized
Further accessory
Fixed bearings with the same installation height as the weighing module are e.g. very
helpful as a dummy for installations. Please find further information in a separate data
sheet.
10.1 Scope of delivery
Weighing module complete mounted with stay rod, thrust pieces, ground wire and load
cell.
1)
The threaded rods have to be adapted to the corresponding installation conditions on the customer
side.