HBK Bruel & Kjaer 3670-A-082, User Manual

Page: 17 / 36

CHAPTER 2
Connect and Install
9
✐
Please note: It is recommended to close all other applications before running in order to avoid the need to restart
your PC.
Fig.2.3
BKSV USB Audio Driver
installer
3) Click Next and follow the instructions in the installation tool. When complete, click Finish .
4) If not already done, connect Type 3670 to the PC via USB and switch it on.
✐
Please note:
If Type 3670 is not connected before you install the audio driver, you will get a warning that your
device will need to be disconnected and reconnected. Click
Yes to continue, then connect
Type 3670.
5) Click in the PC Taskbar to open the BKSV USB Audio Control Panel.
6) Ensure
BKSV USB Audio 2.0
(the instrument’s firmware) is detected and listed. If not, check the
connection to Type 3670.
2.3 (Optional) Installing the USB Audio Tool
The USB Audio Tool provides a simple interface that can be used for a quick check of the input and
output functionality of Type 3670 and includes limited generator functionality, a time signal and an
FFT signal window.
The USB Audio Tool is included on the USB memory stick (Item no. BZ-5089) that is delivered with
Type 3670.
Alternatively, you can download the software
*
and manual at bksv.com (go to Support > Downloads >
3670 USB Audio Demo Tool ).
To install the USB Audio Tool:
1) Copy the content of the included memory stick or the downloaded files to your local drive and
unpack the zipped file.
2) Run the setup program, setup.exe.
3) Run the setup program:
• If installing from the memory stick select setup.exe
• If installing from the Downloads page, select USB Audio tool setup wizard
* The latest version of the software is always available for download.