background image

Notes on the Installation, Initial Start-up, Operation

Radio Receiver FSE 514

Page 4 / 16

BE-514_I-V1-3-FCC.doc.DOC [ Word 2000 ] MB

HBC-radiomatic GmbH • D-74564 Crailsheim • GERMANY

30-04-2003

Information and specifications subject to change without notice.

Radio System

1

Description

The FSE 514 radio receiver is designed for the wireless reception of command
instructions for controlling light-weight industrial cranes and small hoists.

The FSE 514 radio receiver can receive and process up to 14 control commands.

A non-interchangeable system address ensures the functional safety of the radio control
system when operating cranes or machines, This feature is particularly important when
several cranes or machines are in use, for example in halls and shops. The system
address is exclusively allocated to each HBC radio transmitter and its respective
receiver.

It is not possible to activate crane or machine functions using a radio control
system allocated to another crane or machine.

The radio receiver has general telecommunications approvals. It is not necessary to
have or to apply for a license to operate the receiver and the respective transmitter. The
radio receiver broadcasts in either a 30 cm or 70 cm bandwidth. The receiver is
equipped with < 5 mW or < 10 mW transmitting power.

Operating the radio receiver and transmitter using a different frequency range requires
the approval of the competent regulative authorities for telecommunications.

High-quality radio technology pursuant to the guidelines laid down by the German
Regulative Authorities for Telecommunications and Postal Services and the Regulations
For The Prevention of Accidents combined with perfected microprocessor technology
guarantees the highest degree of operative safety, service quality and serviceable life.

Summary of Contents for FSE 514



















Reviews: