Operating Instructions
eco L Radio Transmitter
Page 10 / 20
BE-ECO-L-V2-4(FCC).doc [ Word 2000 ] MB
HBC-radiomatic GmbH • 74564 Crailsheim • GERMANY
2003-02-12
Information and specifications subject to change without notice.
Radio Control System
3.1
Special Operating Elements and Functions
3.1.1 "SCANNER" Rotary Switch
( Frequency Selector )
The transmitter and receiver are equipped with a "Scanner"
(frequency selector) operating mode with 4 radio
frequencies (refer to wiring diagrams).
In the event that the momentarily used radio channel is
being used by another operator, the transmitter can be
switched over to a different channel by means of the rotary
switch SCANNER (fig. right, pos.
). The receiver scanner
automatically adjusts the receiver to the selected radio
frequency.
After turning ON the transmitter (set key switch to "ON"
position and do not forget to unlock STOP pushbutton), the
receiver automatically resets the system to the new
frequency selected in less than a second.
3.1.2 "4 Speeds" Rotary Switch
4 maximum speeds of the crane may be adjusted using
the rotary switch (fig. right, pos.
).
The symbols for the speed adaptation have the following
meanings :
= maximum speed , 100 %
= maximum speed , limited to 75 %
= maximum speed , limited to 50 %
= maximum speed , limited to 25 %
