Wire and Flex level sensor manual 04
October 2021 HBproducts.dk 1
Wire
and Flex are intelligent liquid level sensors which can be installed in a vessel or in a standpipe. For the Wire sensor the
sensor element is a stainless steel wire insulated with PTFE and for the Flex sensor the element is a stainless steel wire
mounted with steel tube elements to increase the sensitivity. Both sensors can to be mounted directly in a stand pipe. If they
need to be installed in a vessel they need an inner pipe. Both sensors measure between the wire/tube elements and the sur-
rounding pipe.
The sensor can be installed in refrigeration systems and similar demanding applications with high pressures and aggressive
fluids. The sensor emits a 4
-
20mA analog signal, which is proportional to the liquid level.
Introduction
Manual for all flexible level sensors and wire sensors delivered be-
fore October 15th 2021
Covers: HBLT & HBSLT
•
Wire sensor suited for liquids like NH3, and HFC/HFO refrigerants
•
Flex sensor suited for liquids like CO2 and Hydro carbons
Can be used in refrigeration systems and similar demanding systems.
ATEX/Ex versions included
