HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstrasse 25 – 29 · 42857 REMSCHEID · GERMANY
[
+49 (0) 21 91 / 7 92-0 ·
\
+49 (0) 21 91 / 7 92-375 ·
^
hazet.de ·
]
223195 Il. 01.2021/∞ CB/114
•
Oil flow regulation
Use the oil flow regulator
5
on top of the lubrica-
tor in order to dose the oil quantity to be sprayed:
– turn the regulator knob clockwise to decrease
the oil quantity
– turn the regulator knob counterclockwise to
increase the oil quantity.
CAUTION:
The maximum inlet pressure must not
exceed the values listed in the technical
data.
• Do not expose the tool set to heat sources higher
than 60 °C.
• Avoid installing the maintenance unit and the
filter-pressure reducer in places subject to shock,
vibration, or other types of stress.
• Avoid installing the maintenance unit and the filter-
pressure reducer in places with strong concentra-
tions of alcohol or solvents.
• Take care not to unscrew the cups or other parts
of the maintenance unit or the filter-pressure redu-
cer without first depressurizing the system.
• Keep tool set out of reach of children.
• Incorrect use may damage the product. It is
therefore essential to scrupulously observe the
contents of this application note.
11. Storage
The tool set has to be stored according the
following conditions:
• Do not store the tool set outdoors.
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids and aggressive
substances.
• Storage temperature: -10 up to +55 °C.
• Relative air humidity: max. 65 %.
12. Maintenance and Cleaning
• Use only soap and water to clean the cups.
Do not use detergent oils, brake circuit oils,
or solvents.
• Regularly drain the condensate that forms in the
filter cup.
CAUTION: you are advised to use models
9070-3, 9070-4, 9070-6 and 9070-7 with
GAV Sprinter ADPV 22L oil.
The use of other oils can permanently damage the
product if they do not comply with the required
characteristics for lubricators.