10
Always ensure that the drive shaft joint is aligned to the drive shaft.
3
Design and function
3.1. Technical data / tool components
Components
1
Designation
7
1
1847-12
Circlip pliers
1
2
1847-121/2
Half shell pair (Ø19.0mm)
1
3
1847-122/2
Half shell pair (Ø21.4mm)
1
4
1847-123/2
Half shell pair (Ø22.3-23.0mm)
1
5
1847-124/2
Half shell pair (Ø23.8-24.6mm)
1
6
1847-125/2
Half shell pair (Ø26.2-26.9mm)
1
7
1847-126/2
Half shell pair (Ø28.5-29.2mm)
1
8
1847-127/2
Half shell pair (Ø30.0mm)
1
3.2. Use
• These instructions are provided as a guide only.
Always make sure that you have a copy of the
appropriate vehicle manufacturer's service instruc-
tions or another appropriate manual that provides
the correct information needed to correctly execute
the work.
• The circlip must not tilt.
• Always ensure that the drive shaft joint is aligned
to the drive shaft.
• Damage to the serration of the drive shaft joint and
the drive shaft is avoided.
• If necessary, loosen or remove any attached parts.
• Less effort required when opening the drive shaft
joint since the protruding circlip is tensioned in the
groove.
• Easier attachment and sliding of the drive shaft joint
onto the drive shaft by a special half shell shaping.
3
2
4
6
8
5
7
