HAZET-WERK 9041-3, Operating Instructions Manual

Page: 17 / 28

17
4
Maintenance and Cleaning
1. Storage
The tool must be stored according
the following conditions:
• Keep the tool in a dry and dust­free place.
• Do not expose the tool to liquids and/or
aggressive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: ­10°C to +40°C.
• Relative air humidity: max. 60%.
6 Disposal
1. Disposal
• For disposal, clean tool and disassemble
it according to the regulations for work
safety and environmental protection.
Components can be recycled.
• Metal components can be scrapped.
Reducing environmental pollution and
preserving the environment are at the
heart of our activities.
HAZET – environmental protection is of
fundamental importance to us.
1. Maintenance and Cleaning
Always disconnect the device from the
compressed air supply prior to carrying out
maintenance work.
Only use spare parts recommended by the
manufacturer, as any other parts will invali­
date any express or implied warranty.
Ensure that the relevant environmental pro­
tection regulations are observed when dis­
posing of individual parts, lubricants and
oils, etc.
For tool cleaning or cleaning of its compo­
nents we recommend the usage of cleaning
solvent.
Never clean with solvents or acids, esters
(organic compounds comprising acids
and alcohol), acetone (ketone), chlorinated
hydrocarbons or oils containing nitro hydro­
carbons. Do not use any chemicals with a
low burning point.
• For customer service, please contact your
HAZET distributor.
2. Spare Parts
• Only use the manufacturer’s original spare
parts.
• Unsuitable or defective spare parts may
cause damage, malfunction or total failure of
the tool.
• The use of non­approved spare parts will
void all warranty, service and liability claims
as well as all claims for compensation
against the manufacturer or their agents,
distributors and sales representatives.
5
Storage