Hayward RC34 series, Owner'S Manual, Page: 34 / 162

HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.
Page 13 of 20 Rev. C
c. If filter elements are clogged with oils you can purchase filter cartridge cleaner from your Hayward retail dealer
d. Wash the entire filter bucket assembly.
e. Place the filter cartridges back into the filter bucket assembly with the center frame reinforcements facing inward.
f. Snap the filter door latches into place.
6. Return the filter bucket assembly into the cleaner using the diagram shown to determine the front and back.
7. Close the dome and press the lid button to snap dome into place.
Periodic Cleaning of Moving Parts
⚠
WARNING: Disconnect the power supply from electrical outlet before cleaning moving parts.
● Inspect the venturi to ensure that no debris or hair has clogged
the impeller.
● The impeller can be cleaned by spraying it with a garden hose.
● Spray water using a garden hose around the float to remove any
sand or debris.
● Remove any debris that has accumulated between the tracks and wheels.
Storage
When unit is out of the water, store the cleaner in a dry, shady location at temperatures between 4°C - 46°C (40°F - 115°F).
Cable Care
With continued use, the cable may become coiled (like a telephone cord). To correct this, stretching the cord out in the sun,
the sun’s heat will reduce cord twisting.
IMPORTANT: The cable should be checked periodically for any external damage.