NOTE: If the chlorine level does not increase within 24 hours after increasing output, test water using an
independent test kit to determine the current salt, stabilizer, phosphate, and nitrate levels.
NOTE: Output is scaled back to 20% or lower (depending on where the dial is set) at 60
°
F and chlorine
production stops altogether at 50
°
F.
How To: Adjust Chlorine Output
10
The “
Daily Chlorine Output
” buttons set the level of production during the generating cycle. Generating cycles
occur in 60 minute increments. Each led illuminated (from Min to MAX) represents 10%, or six(6) minutes
of chlorine production time.
Example: The first 4 LED’s being on implies the
Cell
is producing chlorine 40% of the pump run time; so the
Cell
should produce chlorine for the first 24 minutes of each hour before repeating.
Press to decrease
output setting
Press to increase
output setting
S
Press to Super
Chlorinate
(Temporarily increases
chlorine output to 100%
for 24 hours. Pump must
be on during this time)
