AquaPod 2.0 Operation
AquaPod 2.0 Screen Brightness
The "+" and "-" buttons are used to increase and decrease screen brightness. To change screen
brightness at any menu, perform the following:
• Press and hold “+” key for 1.5 seconds - screen brightness starts to increase
• Press and hold “–” key for 1.5 seconds - screen brightness starts to decrease
Unlock Configuration Menu
To unlock the Configuration Menu, repeatedly press the Menu button until "Configuration Menu"
is shown in the Menu Display. Press and hold the Menu Display for 5 seconds. Refer to your pool
control's manual to determine what options are offered within the Configuration Menu.
Calibration Screen
The AquaPod 2.0 touchscreen comes calibrated from the factory and should function properly at
installation. If the screen does not respond accurately to touch, you can try resetting the calibra-
tion to factory settings or manually calibrate the screen. These options will be shown when you
unlock the Touch Screen (TS) Calibration Menu. To unlock the TS Calibration screen, repeatedly
press the Menu button until "TS Calibration" is shown in the Menu Display. Press and hold the
Menu Display for 5 seconds.
The TS Calibration menu will offer the following three options:
Start:
Select Start to begin calibration. Follow screen prompts until finished.
Cancel:
Select Cancel to exit the calibration screen.
Reset:
Select Reset to delete previous calibration settings.
Press and hold
for 5 seconds
Press and hold
for 5 seconds
Friday
Filter
MORE >
MENU
<
<
+
-
Pool
Air
84
88
Configuration
Menu-Locked
4:03P
Pool
Lights
Heater 1
Aux Valve
º
º
Friday
Filter
MORE >
MENU
<
<
+
-
Pool
Air
84
88
TS Calibration
Locked
4:03P
Pool
Lights
Heater 1
Aux Valve
º
º
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
6
