Page 21 of 31
HAY
SY
S L
IM
IT
ED
PHA
SE
ID
ENT
IFI
CA
TI
O
N
U
NI
T
Figure 13 - Bridge Server details
Note:
The IP address of the server must be accessible from outside of the customers internal
network. The example shown in Figure 13 above shows the internal IP address of the host
computer. In this example, the external IP address and port is re-directed to an internal IP
address.
Press the ‘Save’ button and confirm that the green colour is shown.
Next, activate the bridge server by pressing the ‘Bridge Inactive’ button, which will respond by
the button text changing to ‘Bridge Active’ as shown in Figure 14 below.
Figure 14 - Bridge Server Active
Next, select the ‘Status’ tab to show the status of the bridge server. This should look the same
as Figure 15 below. The number in the centre of the green ‘Server ready’ indication, shows the
active count of PIUs currently connected and communicating with the bridge.