STORAGE:
1. Unplug extension cord from the wall outlet.
2. Unplug each section of extension cord.
3. Gently lift off the top and middle sections, and remove the bottom section from the
tree stand.
4. Carefully place the tree in its box and tape it shut. Store box in a cool dry and
place the temperature does not exceed 100 °F.
CAUTION:
1. Do not allow metal objects to come in contact with lights or wires.
2. Do not use lights if wire insulation is damaged.
3. Do not overload. Connect only miniature light strings.
4. This pre-lit tree contains 50/100/150 lamps per string. To reduce the risk of
overheating, replace with 2.5 volts lamp only.
5. Use on 115-125 volts outlet only.
PRELACEMENT:
To replace burned-out bulbs, follow directions below:
1. Make sure the set is unplugged.
2. Pull bulbs and base straight out of socket.
3. Inset replacement bulbs and base into empty socket, making sure base is
connected.
4. Plug light set back in wall outlet.
Important: If the light set does not light, push each bulb firmly into the socket.
Bulbs may have loosened during transportation.
CATUION:
-BURNED OUT BULBS SHOULD BE REPLACED QUICKLY. SEVERAL
BURNED OUT BULB LEFT MAY CAUSE OTHERS TO BURN OUT.
-TO REDUCE THE CHANCE OF EXCESSIVE HEAT AND DAMAGE DO NOT
ATTACH DECORATIVE FEATURES TO BULBS.
-TO REDUCE THE RISK OF FIRE AND ELECTRICAL SHOCK. DO NOT PLACE
TREE NEAR OPEN FLAMES.
-KEEP LIGHT OUT OF THE REACH OF YOUNG CHILDREN.
-TURN SET OFF WHEN LEAVING HOME OR RETIRING AT NIGHT.
-DO NOT OVERLOAD. CONNECT ONLY MINIATURE LIGHT.
-FOR INDOOR OUR OUTDOOR USE 115-125 VOLTS A.C.
-DO NOT CONNECT MORE THAN 3 SETS.DO NOT CONNECT WITH
STANDARD C-7 OR C-9 LIGHT SETS OR STRINGS.A SHORT CIRCUIT
AND/OR FIRE MAY RESULT.
Summary of Contents for EWB003
Page 4: ......
