Hayes H08-15530D, Quick Start Manual, Page: 4 / 12

4
Windows 2000 Users: A few seconds after startup, you
may see the Digital Signature Not Found dialog box.
You can safely ignore this message and click Yes .
Continue below with Completing the Installation .
Windows XP Users: When the Found New Hardware
Wizard dialog box appears, click Next . You may see a
disclaimer box regarding Windows logo testing. You can
safely disregard this message and click
Continue
Anyway . Continue with Completing the Installation .
Completing the Installation
1111
Open the Control Panel (and, in Windows XP only, click
Printers and Other Hardware ). Then double-click the
Modems or Phone and Modem Options icon.
2222
You may be asked to fill out Location Information if you
have not had a modem installed previously. Type the
required information and, when done, click
OK or Close .
Windows XP and Windows 2000 Users: Click the
Modems tab, under Phone and Modem Options , to
proceed to Step 3.
3333
Select the entry for your new modem and then click
Properties .
4444
Set the Maximum speed to the highest speed available
(115,200).
Windows XP Users: You have to click the Modem tab
before you can set the Maximum speed .
Click OK and close the currently open dialog box.
5555
Click the Diagnostics tab. In Windows XP , click Query
Modem . Select the port next to the entry for your new
modem (for example, COM3 ) and click More info or
Query Modem . This step tests the modem by querying it
with AT commands. A list of responses means that your
new modem is properly connected.
CONGRATULATIONS! You have successfully installed your PCI
modem. Installing the Communications Software , described
below, is optional. For removal instructions, see page 6.