background image

PCI Modem

QUICK START

This Quick Start describes PCI modem installation for
computers using Windows

 98, Me, 2000, or XP.

Please make sure you have the following: modem,
telephone cord, and software on diskette(s) or CD-
ROM.

Windows 98/Me/2000/XP Users:

You must run the setup software 

before

 installing the modem

card. Continue with 

Installing the Drivers

 below.

Important – If your computer already has an internal

PCI modem installed

You should remove the modem and its drivers now. Your old
modem may interfere with the installation of your new modem.
Please refer to page 6 now.

Installing the Drivers

1111

 

Your computer should be on. Close any running
applications.
Insert the CD-ROM disc that came with your modem into
your CD-ROM drive. If the CD does not start
automatically, double-click 

My Computer

 on your

desktop; then double-click the icon for your CD-ROM
drive. If the installation program doesn’t begin
immediately, double-click 

Setup.exe

.

2222

 

When the main installation menu opens, click 

Install

Modem Drivers

 and then click 

PCI Drivers

.

The installation program runs and automatically copies
driver files to your hard drive. Follow the prompts.

Summary of Contents for H08-15530D













Reviews: