http://www.hayear.com
HAYEAR CAMERA
Shenzhen Hayear Electronics Co, Ltd.
www.hayear.com
- 9 -
14
：
version
Model: HY-1137
15
：
Electronic amplification and reduction
Press the “freeze” button the image will electronic amplification, the multiple will be showed on the left of the
image, the maximum multiple up to 5 times and image will be vague when magnification.
After electronic amplification, press on the “capture” button the image will reduction, the multiple will be
shown on the left of the image and it can reduce to the original size
16
：
Switch photo and video mode
The system default is photo mode, press the “OK” button to take photo.
Press the “MODEL” button to switch video mode, press the “OK” button to start capture and press “OK” button
again to stop recording.
HDMI output
First, make sure the connected monitor is hd monitor, otherwise the resolution can not reach 1080P.
Second, power on the microscope and connect it to the hd monitor, make sure there is power on when
using since there is no built-in battery.
Third, turn on the microscope, put the observation on the platform and adjust the working distance to get
a clear image.
Under the HDMI output, the microscope can take picture, but can not record video.
FAQ
1: Why these is no image on the monitor?
Check if all the lines connected properly and power switch is turn on.
2: Why the image vague?
Please adjust the focal distance, lighting angle, check if there is dirt on the lens.
3: Why the remote control can not work?
There is no battery in the package, check if you has installed it.
4: Why there is no image on monitor when playback?
Maybe the video is not kept intact, or the video file is too large, and the system needs run time.
