Allen key
E x 4
D x 2
C x 4
A x 1
B x 1
H x 2
G x 2
F x 7
PA RTS
1. Place the 2 x C parts with the threads facing up and the side holes facing each other.
Insert the D part with the tapered holes facing up in the C parts’ side holes.
The instructions below show how to assemble the brackets, which appear in different
steps throughout the instruction manual. Do not assemble them before the rest of
the table, but wait until the relevant steps require their assembly.
2. Insert the E parts into the C parts and screw each of them half way in a first phase,
to make sure they both fit the D parts tapered holes.
3. Tighten the E parts completely.
2mm
NOTE ON HOW TO USE THE ASSEMBLY BR ACK ETS
