background image

 

 

10/21 

Model H1117LN.8 

    Page 1 of 10 

 

 

 

 

 

 

1455 Kleppe Lane 

Sparks, NV 89431-6467 

(775) 359-4712 

Fax (775) 359-7424 

E-mail

[email protected]

 

 

website

www.hawsco.com

 

 

 

No. 0510001192 (3) 

 
 
 
 
 
 
 

 

 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Model H1117LN.8 

Water Cooler 

 

 

INSTALLATION, OPERATION 

MAINTENANCE INSTRUCTIONS 

 

LIMITED WARRANTY 

HAWS 

warrants that all of its products are guaranteed against defective material or poor workmanship for 

a period of

 one year from the date of shipment. 

The foregoing notwithstanding, 

HAWS

 warrants certain 

specific  products  or  components  thereof  for  an  adjusted  period.  A  list  of  these  excepted  products  and 
components  and  a  description  of  their  respective  warranty  terms  may  be  found  here: 
www.hawsco.com/warranty. 

HAWS

’ liability under this warranty shall be discharged by furnishing without 

charge  F.O.B. 

HAWS

  factory  any  goods,  or  part  thereof,  which  shall  appear  to  the  Company  upon 

inspection  to  be  of  defective  material  or  not  of  first-class  workmanship,  provided  that  a  claim  is  made  in 
writing to Company within a reasonable period after receipt of the product. Where claims for defects are 
made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. 

HAWS

 shall 

not be liable for the cost of repairs, alterations or replacements, or the labor required to implement them, or 
for any expense connected therewith made by the owner or owner’s agents, except upon written authority 
from 

HAWS

HAWS

  shall  not  be  liable  for  any  damages  caused  by  defective  materials  or  poor 

workmanship, except for replacements, as provided above. Buyer agrees that 

HAWS

 has made no other 

warranties  either  express  or  implied in  addition  to  those  above stated,  except  that  of  title  with  respect  to 
any of the products or equipment sold hereunder and that 

HAWS

 shall not be liable for general, special, 

incidental, or consequential damages claimed to arise under the contract of sale.  

 

Equipment  manufactured  by  HAWS  is  warranted  to  function  if  installation  and  maintenance  instructions 
provided are adhered to. The units also must be used for the purpose for which they were intended. Any 
HAWS  emergency  equipment  is  intended  to  supplement  first-aid  treatment.  Due  to  widely  varying 
conditions, HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury 
or the aggravation of existing or prior injuries. 

 

EXCEPT  AS  EXPRESSLY  STATED  HEREIN,  HAWS  HEREBY  DISCLAIMS  ALL  WARRANTIES, 
WHETHER  EXPRESS  OR  IMPLIED,  ARISING  BY  LAW  OR  OTHERWISE,  INCLUDING  WITHOUT 
LIMITATION,  ANY  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A 
PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE 
WRITTEN  CONSENT  OF  HAWS.  REMEDIES  AND  REPLACEMENTS  STATED  HEREIN  ARE 
EXCLUSIVE.  IN  NO  EVENT  SHALL  HAWS  BE  LIABLE  FOR  ANY  SPECIAL,  PUNITIVE, 
CONSEQUENTIAL  OR  INCIDENTAL  DAMAGES  TO  ANY  PERSON  INCLUDING  BUT  NOT  LIMITED 
TO DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY 
DAMAGE, OR OTHER MONETARY LOSS.  

 

CAUTION!

 Prior to making any electrical connections, verify with a voltmeter that power from the 

service panel is 

off.

 

NOTE TO INSTALLER: Please leave this information with the Maintenance Department. 

 

Haws electric water coolers are not designed or recommended for outdoor or corrosive 
environments such as enclosed chlorinated pool areas. 
Consideration must be made at the time of installation to adhere to state and/or local codes and 
environmental/atmospheric conditions such as, but not limited to, dust, corrosion, freezing etc. 
These conditions will void the warranty. 

Summary of Contents for H1117LN.8











Reviews: