•
HAWS AG
•
Bachweg 3
•
CH-3401 Burgdorf
•
Switzerland
•
www.haws.ch
HAWS Corporation
•
P.O.Box 2070
•
1455 Kleppe Lane
•
Sparks,Nevada 89431/USA www.hawsco.com
HAWS DRINKING FAUCET COMPANY
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
after 30 minutes, the assembly must be dismantled and re-
Problem
4. Water does not discharge correctly
The flow conduit may be blocked (for remedy, see above).
The eyewash station may not have been set up correctly.
Check the line pressure. This schould be at least 2 BAR /
1.
30 PSI (dynamic).
Blocked flow, possibly due to the conduit not being
2.
correctly flushed out. Dismantle the flow-control element,
and clean the filter insert.
TROUBLESHOOTING
Repair-checklist
1. No flow
Check the main shutoff valve.
2. Insufficient flow of water
3. Flow rate is not as specified
Check the building's main drainage outlet.
Note that it must have adequate capacity to handle the entire
drainage system.
5. Loose connections or fittings
Tighten any loose connection elements. The application of hot
water sometimes makes it easier to put slightly-misaligned
connection elements back into place. If the join is still leaking
sealed.
2080155/5
No.
Model
8317CTFPEX Axion
Combination Shower & Eye/Face Wash
Shower location:
The eyewash station/body shower 8317CTFPEX Axion must be installed in the
vicinity of potential danger zones. It must be highly visible and easily accessible.
Connection conduit:
You are recommended to use a 1 1/4" G conduit, capable of withstanding
pressures of 2 - 6BAR (30 - 90PSI). The use of an inlet filter designed to prevent the entry of
suspended particles and other impurities is also recommended.
Water quality:
Eyewash stations/body shower require a supply of drinking water conforming to
European standards or their equivalents in other countries.
Water temperature:
The required water temperature should be determined the user. The accepted
ideal range is 15 - 35°C / 60 - 95°F (but please ensure conformity with local regulations).
Volume flow:
A minimum flow rate of 60 litres / 15,8 US gallons per minute must be maintained for
the body shower. A minimum flow rate of 6 litres / 1,6 US gallons per minute must be maintained for
the eyewash station. The eyewash station/body shower must be capable of delivering this amount
of water for at least 15 minutes.
Connection to plumbing:
The inlet consists of a 1 1/4" G conduit with female-thread adapter.
Regular inspection:
The eyewash station/body shower 8317CTFPEX Axion should be inspected at weekly intervals. The
inspection tag should be dated and signed after each check.
For more information about any Haws product please contact Modern Plant. Our team of
experts are on call to answer all your questions and provide you with any advice.
Web: www.safetyshowerstations.ie | Email: [email protected] | Tel: 01 461 4300
