- 26 -
PARTS DESCRIPTION
1.
Cover
2.
Egg tray
3.
Heating plate
4.
Indicator lights
5.
ON/OFF button
6.
Handle
7.
Measuring cup
8.
Egg piercer
9.
Socket for measuring cup
(You can pull out the socket cover to store the measuring cup.)
10.
Language selection button
LANGUAGE SELECTION
You can select your desired language for the voice message. Always make this language selection before adding
water and eggs. Put the plug into the power outlet. Long press the button at the bottom of the appliance to
select the language.
The default language is Danish, and the setting is cycled in the order below, but some of the appliances may be
different due to the routine test when leaving factory.
1.
Long press the button for 2-3 seconds, when you hear 2 beeps, the language is set as Norwegian.
2.
Long press the button for 2-3 seconds, when you hear 3 beeps, the language is set as Swedish.
3.
Long press the button for 2-3 seconds, when you hear 4 beeps, the language is set as English
4.
Long press the button for 2-3 seconds, when you hear 5 beeps, the language is set as German.
5.
Long press the button for 2-3 seconds, when you hear 1 beep, the language is set as Danish.
Note: The appliance has memory for this language selection, so you don’t need to set it each time if you don’t
want to change the language.
HOW TO USE
Warning: Please be careful when pouring out water from the appliance. Always unplug the egg boiler before
moving and before pouring out water. Never let water run over the ON/OFF button and indicator lights.
1.
Remove the cover and egg tray to pour water onto the heating plate. Use the measuring cup and every time
pour two cups of water (each cup contains water to the scale mark).
2.
Place the egg tray above the heating plate.
3.
Use the egg piercer to prick a small aperture into the big end of each egg. The piercing pin is very sharp, use
with extreme caution. This prevents the eggshells bursting during boiling.
AET6 EN
Summary of Contents for AET6
Page 1: ......
