Curved Stairlift Owner’s Manual | | 0040 25
6 377385
–
RO
0049 2295 901605 - DE
9 / 18
To put the lift into operation, proceed as follows:
- bring down the arms (2) and (7) from the vertical position, as shown in fig. 4,
to a horizontal position, as shown in fig. 5.
- the same applies to the seat (3)
- by lifting the handle (6), you can also tilt the foot rest (5) from a folded
position fig. 2 to a use position fig. 5; after that, you can get on the lift. Starting and
moving the lift is made by moving the joystick (1) fig. 5, as follows:
- to move to the right, move the joystick to the right and hold.
- to move to the left, move the joystick to the left and hold
- we do not recommend that you interrupt the command unless in case of
obstacles
- to stop the lift at either end of the track, the control joystick must remain
actuated until the lift reaches the charging contacts and stops on its own, followed by
the blue LED (8) on the joystick arm lighting up, this indicating that the battery is
charging from the power supply
- if the lift is stopped on the track outside the charging elements, it will beep to
warn that the battery is not charging, and therefore that it must be moved so that the
lift may reach the charging contacts
- when the travel ends and the top of the track is reached, the seat (3) with
backrest and arms (2) and (7) fig. 5 are rotated to max. 90° to facilitate the user to get
on and off the seat. The standard stair lift is equipped with manual swivel seat
function. Next are the steps for using this function:
- lift one of the handles (11) and slowly rotate the seat. After the seat starts to
rotate release the handle (11) and continue the rotation in the direction you have to get
of the lift. The rotation of the seat stops at 75
⁰
- fig no 5.1. if you want the seat to
rotate to 90
⁰
, lift the handle (11) again and turn more in the same direction until the
seat reaches 90
⁰
.
- to get back to the normal running position lift again the handle (11) and move
in the opposite direction as described above until the seat reaches the normal running
position.
Optionally, the stair lift can be equipped with electrical swivel seat function.
This movement is controlled by button (4) fig. 5, as follows:
- actuate the button in the right for right lifts or in the left for left lifts, and rotating will
occur as long as the button is pressed down, automatically stopping at a max. angle of
rotation of 90°
- optionally, the rotation angle of the seat can also be programmed by default at
another intermediate value. Value which should be communicated at the time when
the lift is ordered
- to return
the backrest and seat in normal travel position fig. 6, press the same
button on the reverse side.
