background image

7

   IMPORTANT SAFETY WARNINGS

General Safety Instructions

 

Warning: Please read the following instructions carefully, 
failure to do so could lead to serious personal injury. 
When using the eletctic cutting shredder,basic safety 
precautions, including the following, should always 
be followed to reduce the risk of fire,electric shock 
and personal injury. Read all these instructions before 
operating this product and save these instructions.

 

Become familiar with the owner’s manual before 
attempting to operate this machine.

•  This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance 
by a person responsible for their safety.

•  Children should be supervised to ensure that they do not play 

with the appliance.

•  Follow the checklist below, before attempting to use the 

machine.
-  The sheathing of the flex in the plug or socket is securely 

gripped under the cord grip.

-  There is no damage to the sheath of the extension lead.
-  The cable is not trapped under the wheel or support feet to 

avoid damage or accidental tripping.

-  The lead is fully unwound from the reel to avoid overheating.

Summary of Contents for 90496




























Reviews: