INstallation Guide
308.708.8185 | [email protected]| Rev. 10/19
13
(4) - Add new hardware as shown
41 - Slide one (1) Crush Sleeve (321523) over each end of the axle.
42 - Slide two (2) Washers (413117) over the left crush sleeve, and one (1) Washer (413117)
over the right crush sleeve.
IMPORTANT: Ensure each Crush Sleeve (321523) stays tight against the arm brace and that
the Washer (413117) fits over the crush sleeve throughout installation. DO NOT allow the
Washer (413117) to slide behind the Crush Sleeve (321523)
(5) - Slide front inline arms over crush sleeve as shown