- 22 -
3.3 Configuring the IP Address of the PC
If you fail to access to the camera using the above methods,
please check the IP address of your computer. You can connect to
the camera directly from your computer to configure the camera.
You need to set up the IP addresses to be in the same segment for
the two devices to communicate.
1.
On your computer, click
Start > Control Panel
to open the
Control Panel window.
2.
Double-click
Network Connection
to open the Network
Connection window.
3.
Right-click
Local Area Connection
and then click
Properties
from the shortcut menu.
4.
When the Local Area Connection Properties window appears,
select the
General
tab.
5.
Select
Internet Protocol [TCP/IP]
and then click
Properties
to
bring up the Internet Protocol [TCP/IP] Properties window.
6.
To configure a fixed IP address that is within the segment of
the camera, select the
Use the following IP address
option.
Then, enter an IP address into the empty field. The suggested
IP address is
192.168.0.x
(
x
is 1~254 except 30), and the
suggested Subnet mask is
255.255.255.0
.
7.
When you are finished, click
OK
.
