4
HAWKEYE 7200 PARAMETER EXPLANATION
Normal Position Reports
Time Based Reporting
Time Based Interval
Normal position reports will be generated at this interval.
Distance Based Reporting
Distance Based Interval
Normal position reports will be generated when the device has displaced this distance.
Altitude Based Reporting
Trigger Altitude (ft.)
Determine the altitude above which a different GPS reporting interval should be in effect.
Interval (sec)
GPS reporting interval above trigger altitude.
Perimeter Range Reporting
Range (ft.)
Determine the range within which the unit will start reporting at the perimeter range interval. The unit will
check every “regular GPS reporting interval” to determine whether the unit has moved more than the
Perimeter Range distance from the previous measurement. If it has not, the perimeter range interval will
be in effect.
Interval (sec)
Perimeter range mode reporting interval.
Event Reporting
Quick Position Events
Reporting Interval (sec):
Reporting interval when Quick Position is activated.
Count
Number of Quick Position messages to be sent.
Excessive GPS Speed
Speeding Event Report Interval
Speeding events will be generated at this frequency when the asset speeding condition is active.
Speed Limit
This is the max speed limit for the asset.
Transition Time
The device will activate the speeding event when the asset is travelling faster its known max speed limit for
this period of time.
Start Movement
Movement Threshold (kph)
The device will use this speed to determine if it should begin monitoring the activation of a start
movement.
Time Delay(sec)
When the starting speed threshold is detected the device will need to maintain a greater speed for this
amount of time before we decide the device should send a start movement event.
Stop Moving/Idle Event
Movement Threshold (kph)
The device will use this speed to determine if should begin monitoring the activation of a stop movement.
Time Delay(sec)
When the speed threshold is detected the device will need to maintain a lower speed for this amount of
time before we decide the device should send a not moving event.
Report type
The device can send interval events, or it can notify only once (single).
Reporting Interval
If the device is supposed to continue to report not moving events it will do so at this rate.
Auto. Take-Off/Landing
Take-Off Speed (knots)
When accelerating through this speed the unit will send a Take-Off message.
Landing Speed (knots)
When decelerating through this speed the unit will send a Landing message.
SUPPORT
Please do not hesitate to contact us via email or on the telephone number listed below. Thank you for choosing
Blue Sky Network.
Phone: +1 858 551 3894
Summary of Contents for HE7200
Page 2: ......
